Close
Shopping Cart
Your Cart is Empty
Total: Proceed To CheckoutContinue Shopping

1-970-368-0791

Blue River Handpiece Repair, LLC​

Handpiece Repair Costs

Below are basic costs associated with repair. 

See Store for replacement

LEARN MORE

Repairs consist of:

Turbine Rebuilds consist of replacing the bearings, orings, springs, wave washers, keepers, seals and a gasket and clean thoroughly inside and out. I check for "pull force" and "static walk" tests to manufacturers specifications with their tools. I check for "concentricity" to make sure the inner clamping parts are holding a bur straight and true so that you may keep margins to a high degree of exactness. The spindle will be re-used.


Turbine Replacements consists of replacing the spindle, bearings, orings, springs, seals and a gasket and clean thoroughly inside and out. A complete replacement where no parts are re-used.


Inner oring replacement on swivel type handpieces are necessary to ensure seals for water and coolant so they do not leak. 

Drive air orings are also necessary to ensure air force gets to the turbine so that you have proper torque at speed.

Swivels also need orings and gaskets replaced so please do not forget to send those in too. 

Pricing is $30.00 - $75.00 per piece with a year warranty

High Speed Turbine Repair

 I will clean the spindle using various techniques to ensure the tests are not compromised by debris.

In the repair of a turbine the original spindle is re-used if it passes a "Pull" or "Concentricity" test. 

ISO standards for concentricity is < .11 inch run out to keep a decent margin.

BRHR Concentricity standard is < .06 inch to keep margins tight. 

Repair Costs:

$120.00 / 9 month warranty

High Speed Turbine Replacement AM

An Aftermarket turbine is generally made by a manufacturer not associated with the original manufacturer. Years ago this was an issue, not in todays machining market. 

A new turbine generally has a concentricity of < .03 in. runout. 

ISO standards for concentricity is < .11 runout to keep a decent margin. Obviously newer turbines have the best concentricity so if this is important to you please make the choice to upgrade from a repair to a replacement.

AM Replacement Costs:

$220.00 / 9 month warranty

High Speed Turbine Replacement OEM

If you request an (OEM) Original Equipment by Manufacturer. The costs go up exponentially.

OEM Replacement Costs:

$350.00 - $425.00 / year warranty

Electric High Speed 1:5 Rebuild

Rebuilds on these are expensive because these are based on a Metal gearing system, which creates very abrasive debris, and electric motors that don't stop under load like a pnuematic will. the longer you wait to repair the more expense involved.    

Rebuild Costs:

$600.00 / Six month warranty

Electric High Speed 1:5 Repair with new Spindle and intermediate shaft

Repairs on these are expensive because these are based on a Metal gearing system, which creates very abrasive debris, and electric motors that don't stop under load like a pnuematic will. the longer you wait to repair the more expense involved. If the gearing on the spindle is worn or the chuck fails to hold a bur a new cartridge is needed and much like a electric high speed the price goes up

Repair Costs:

$720.00 / Six month warranty

Electric Low Speed  Repair

Repairs on these are expensive because these are based on a Metal gearing system, which creates very abrasive debris, and electric motors that don't stop under load like a pnuematic will. the longer you wait to repair the more expense involved. If the gearing on the spindle is worn or the chuck fails to hold a bur a new cartridge is needed and much like a electric high speed the price goes up

Repair Costs:

$325.00 / year warranty

Electric Low Speed  Latch / friction grip Head Repair

Repairs on these are expensive because these are based on a Metal gearing system, which creates very abrasive debris, and electric motors that don't stop under load like a pnuematic will. the longer you wait to repair the more expense involved. If the gearing on the spindle is worn or the chuck fails to hold a bur a new cartridge is needed and much like a electric high speed the price goes up

Repair Costs:

$125.00 / year warranty

Electric Low Speed  prophy Head Repair

Repairs on these are expensive because these are based on a Metal gearing system, which creates very abrasive debris, and electric motors that don't stop under load like a pnuematic will. the longer you wait to repair the more expense involved. If the gearing on the spindle is worn or the chuck fails to hold a bur a new cartridge is needed and much like a electric high speed the price goes up

Repair Costs:

$225.00 / year warranty

Low Speed 

 Latch / friction grip Head Repair

Repairs on these are not very expensive if the gears are not worn and/or the locking mechanism is not locking . 

Repair Costs:

$60.00 / year warranty

Low Speed 

 Latch / friction grip Head Replacement

Replacement on these are very expensive if the gears are worn and/or the locking mechanism is not locking . 

Replacement Costs:

See store / year warranty

Air Low Speed Motors

Low speed repairs consist of replacing bearings, orings, gears, compression rings, springs, sun gears, impellers, vanes, micro springs and cleaning of all internal parts via Ultrasonic cleaner

for $160.00 / year warranty

Air Attachments and Nosecones

Attachment and Nosecone Repair consists of replacing bearings, gears, sun gears, drive dogs, springs, orings, plates and posts, shafts, pins​ and a complete cleaning of all internal parts via Ultrasonic cleaner 

for $110.00 / year warranty

Ultrasonic Replacement

Ultrasonic Scaler Inserts come in 

25kHz or 30kHz variations. The tips are the key from that point on. Whether you want, Available in Plastic with Universal, Slim, Beavertail tips for $90.00 / 3 month warranty or Straight, Right or Left Metal External water flow 

for $110.00 / 3 month warranty

Impaction Drill without Cord

Repair consist of replacing bearings, orings, springs, seals, retaining ring, pins and

cleaning of all internal parts via Ultrasonic cleaner

for $350.00 / 6 month warranty

Impaction Drill with Cord

Repair consist of replacing bearings, orings, springs, seals, retaining ring, pins and

cleaning of all internal parts via Ultrasonic cleaner

for $550.00 / 6 month warranty

Impaction Drill with Sensor Failure

Repair consist of replacing Sensor, bearings, orings, springs, seals, retaining ring, pins and

cleaning of all internal parts via Ultrasonic cleaner

for $950.00 / 6 month warranty

Implant 

Drill 20:1 

Repair consist of replacing bearings, Gears, Main gear, orings, springs, seals, retaining ring, pins and

cleaning of all internal parts via Ultrasonic cleaner

for $350.00 / year warranty

Surgical Drill 

1:2 Nosecone Angle

Repair consist of replacing bearings, Gears, Main gear, orings, springs, seals, retaining ring, pins and

cleaning of all internal parts via Ultrasonic cleaner

for $250.00 / six month warranty

Surgical High Speed

Repair consist of replacing bearings, orings, springs, seals and

cleaning of all internal parts via Ultrasonic cleaner

for $120.00 / six month warranty

/